Keeping your boiler in tip top condition
It is vitally important to keep your boiler running as smoothly as possible so the work of a Boiler Service Cheltenham firm is an essential part of your home maintenance routine. Visit HPR Services for more information.
You don’t want to find yourself in the middle of winter with no hot water, or worse yet, a central heating system that isn’t working. You should also remember that a gas boiler uses both electricity and water to generate heat. Also, it is not a good thing to try to fix the boiler yourself, as it could explode. A Gas Safe registered engineer is a must.
What are the common causes of heating faults?
One quick fix is to bleed your radiators. It is safe to try this as there are minimal risks. This is only to fix a problem with central heating. If the system has been dormant, such as in the summer months, you can use a tissue or towel to bleed the radiators. This will remove any air trapped in the radiators that the boiler is unable to push water through. It is important to do this as it will show if the problem is with the water heater or pump. You will find the valve on the right hand corner of the radiator. You will need to turn this with a radiator key. Listen very carefully to the sound as air is escaping. The hot water pushing it will release the pressure and force the air out. Keep in mind that the water may start to flow out of the valve if you do not keep an eye on it. The system should flow smoothly after the radiator has warmed up.
The boiler can malfunction for a number of different reasons. There may be a draft into the system if the pilot light is constantly going out. Another common problem can be the buildup of limescale and sludge, which is very common in areas with hard water. The boiler will have to work harder and use more gas. Another reason is that the pump has failed. Call the professionals and don’t attempt to fix it on your own.
A leak from a boiler could indicate a broken part, depending on where the leak is coming from. It could mean that a valve or seal needs replacing or could also be due to corrosion inside the boiler.
Post Comment